Product information "Walther SSP, SSPe"
Standard grip, according ISSF rules, stippled and oiled, for Walther SSP, SSPe. 
With adjustable palm rest, moveable 5mm up and down from the middle position! 

Swivelling, like original. The grip angle will be fixed additional with four grub screws.
Attention: Do not tighten the lateral grub screws firmly, but only slightly turn them on contact! The grip mounting happens, with a socket-nut from behind.
The same grip with a steeper angle (like GSP) you'll find here.
Walther LP400/LP500 grip fixing sleeve
for attaching the grip to the Walther LP400/LP500 or Haemmerli AP20 with "memory function", including the lateral attachment screw.Allows 3D panning of the grip, with the position remaining "saved".

€20.83*
Walther GSP fixing part
for grip mounting from below (more stable). Needed if you want to attach your GSP grip with a screw from below, instead of the two lateral screws. Conditions:- corresponding hole below in the frame- lower frame thickness is 16mmAttention: Check the screw length for your grip (there are different variants). A screw that is too long can damage the frame!

€20.83*