Grip putty Epoxy - solid, 30ml, brown
Quick setting, two part epoxy based molding compound for permanent modification of anatomical grips. After hardening it has the strenght like hard wood and sticks verry good at the grip surface.Slice off required amount and kneading it to a uniform color.To prevent sticking, moisten the skin with water.Work quickly, pot life is approximately 5 minutes. Keep out of reach of children. May irritate skin and eyes.Wash hands thoroughly with soap and water after use. Fully hardened material may be disposed of as domestic waste. Unmixed portions should be disposed of a hazardous waste.
Grip putty Silicone - removable, 60ml, brown
Quick setting, two part silicone based molding compound for temporary modificationof anatomical grips. After hardening it has the strenght like hard rubber and it's easy removable from the grip surface. Mix base and hardener in a 1:1 ratio in hand to a uniform color.Work verry quickly. Setting time can be as little as 2 minutes. Will not irritate skin!Hardened material wich becomes loose on the grip may be re-fastened with Super Glue.
Scherell's stock oil light, 50ml
For the finish of our wood products we use “Scherell´s stock oil light” provided by Ballistol GmbH. It is free of any artificial ingredients and gives the wood a silky shine. For regular maintenance the oil should be applied with a rag or a paintbrush and then rubbed in with a linen cloth (lintless) or with the ball of your thumb. The emerging heat enables the oil to sink into the pores and still allows the wood to absorb and evaporate moisture. The more often you repeat this procedure, the classier the surface will become.
Test box/ measuring box
For testing the maximum permissible external dimensions of the pistol with grip according to ISSF rules.With sliding cover and removable partitions for air and sport pistol.Body made of sturdy, white plastic, lid and partitions of transparent acrylic glass!Outside dimensions 438x218x72mm, weight 3kg> to the rules knowledge <
Walther GSP fixing part
for grip mounting from below (more stable). Needed if you want to attach your GSP grip with a screw from below, instead of the two lateral screws. Conditions:- corresponding hole below in the frame- lower frame thickness is 16mmAttention: Check the screw length for your grip (there are different variants). A screw that is too long can damage the frame!
Walther LP400/LP500 grip fixing sleeve
for attaching the grip to the Walther LP400/LP500 or Haemmerli AP20 with "memory function", including the lateral attachment screw.Allows 3D panning of the grip, with the position remaining "saved".